Spectroscopic photoluminescence (sPL) gives access to information on the band gap, electronic defects and the related composition of materials, e.g. the gallium / (gallium+indium) ratio (Ga/(Ga+In) ratio) and copper (Cu) content of CIGS solar cells. LayTec’s sPL has a total measurement and analysis time of only 100 ms.
PearL can also be combined with t-PearL (TRPL) for comprehensive electronic characterization of thin film semiconductors. In particular, the option of vacuum integration can be very advantageous for characterizing uncompromised surfaces.
Generally, PearL and t-PearL can also be used as components in LayTec’s combined and fully integrated ILMetro in-line.
The t-PearL monitoring system analyzes the time-dependent decay of photoluminescent radiation emitted from a probed surface after excitation with laser light. Thereby it provides a direct metric for the carrier lifetime. It is designed for in-line integration in production lines or in a vacuum environment. Time-resolved photoluminescence (TRPL) gives access to information about the minority carrier lifetime and electronic defects of CIGS, CdTe, perovskite thin films and solar cells. By analyzing the superposition of several decay modes, t-PearL provides further information about the nature of recombination processes in compound semiconductors. It can resolve decay times as low as 5ns and can also be modified for longer lifetime materials such as silicon or III/Vs. LayTec’s TRPL has a total measurement and analysis time of only 100 ms.
PearL’s and t-PearL’s advantages under R&D and production conditions for thin film photovoltaics:
PearL and t-PearL are based on LayTec’s modular platform for in-line and in-vacuo optical set-ups. Up to three optical heads can be attached to a single PearL controller, to monitor the composition simultaneously on three traces on moving specimen. This allows accurate monitoring of the center to edge uniformity of the material composition. A controller unit contains all optical and electronic components including a real-time embedded controller for maximum reliability. Optical fibers guide the measurement light between the controller unit and the measurement positions. Miniaturized measurement heads provide optimum optical performance with a small footprint. Sophisticated automated analysis, monitoring, and storage of the data are provided by a metrology PC connected to the controller unit. In addition, PearL can also be integrated with production machines and software systems via a large variety of protocols such as OPC, Ethernet, ProfiBus, and others. Typical accuracy of the measurement at PL Peak position is ± 0.5 nm. With this resolution, the sensitivity to the Ga content for CIGS is ± 0.01 GGI, where GGI is the molar gallium/(gallium + indium) ratio.
With t-PearL lifetimes as low as 5ns can be resolved thereby enabling materials development from very low up to highest lifetimes of several hundred ns. Various algorithms also allow for superimposed decay analyses. For longer lifetime materials modified specifications can be offered upon request.
For further technical information and measurement examples please download our Application Note
如需了解PearL优化铜铟镓硒（CIGS）制程的方式，请联系mail@laytec.de，或拨打电话+49(0)30 89 00 55-0。
PearL and t-PearL – comprehensive photoluminescence characterization of compound semiconductor thin films
PearL qualified for CIGS monitoring in high-volume PV production